How do you clean an electric bicycle?
- 16 Jun, 2021
By properly maintaining your electric bicycle or E-bike, you extend the lifespan. The purchase of such a bicycle is often an expensive affair, by regularly cleaning your bicycle, it will remain beautiful for longer and you will enjoy it longer. Cleaning an E-bike must therefore also be done in a safe manner, in order to preserve the motor, electrical parts and contact points.
Before you get started
An electric bicycle or E-bike is very sensitive to water, so go ga never start cleaning with a high-pressure cleaner or a strong jet of water. The electrical parts cannot withstand this well and there is a chance that the battery, motor or bicycle computer will break.
Which products are you going to use??
Cleanprotec has developed products especially for electric bicycles and E-bikes that are human, material and environmentally friendly. Who wouldn't want that, cycling through nature in a responsible manner! The use of heavy chemical cleaning agents puts an extreme burden on the environment. Therefore, use Cleanprotec products for a better result and conservation of nature.
The Cleanprotec Clean 'n bike has been specially developed to clean your electric bicycle or E-bike easily and without water. It is a customer & ready product for immediate, undiluted use so you don't need extra water! Thanks to the smart technology in this product, you can clean your bike after every ride in a fast, low-water way. The Clean 'n bike encapsulates the dirt and loosens it from the surface, after which you can easily remove the dirt with a microfibre cloth. With a clean and radiant result every time. And just as important: 100% environmentally friendly and very sustainable in use!
This product is suitable for both matte and glossy bicycles and can also be used on carbon. Matt remains matte and glossy becomes glossy again.
What do you need to clean your electric bicycle or E-bike?
- 2 microfibre cloths, 1 for cleaning your bike and 1 cloth for rubbing.
- The Cleanprotec Clean 'n Bike product
Let's get started!
Spray the entire bike with the Clean 'n Bike, by spraying the entire bike, the product has time to loosen the dirt. You can use the Clean 'n Bike on all materials such as the frame, handlebars, saddle, battery, motor, rims and tires.
After the product has had a chance to work in, we will wipe the bicycle with a damp microfibre cloth. If the cloth is very dirty, rinse it out briefly, this way you avoid rubbing the dirt back and forth.
For the beautiful glossy end result, we rub the entire bicycle with a clean dry microfibre cloth. You will be amazed at how quickly and easily you can have your bike sparkling clean again.
Protect your electric bicycle or E-bike with our nano coating Protec 'n Bike
To keep your bike nice and clean for longer, Cleanprotec has developed the Protec 'n Bike. A person, material and environmentally friendly nano coating especially for bicycles, E-bikes and mountain bikes. By treating your bicycle periodically, you protect the materials against the influences of rain, sun and dirt. The product provides long-acting anti-dirt adhesion and easy clean property and forms the basis for regular maintenance, which results in faster and always beautiful results. The Protec 'n Bike can be used on every kind of bicycle and on all kinds of materials that you can find on your bicycle. Convenience squared and just as important: 100% environmentally friendly and very sustainable in use!
The Protec 'n Bike is also suitable for use on both matte and glossy bicycles and carbon frames.
What do you need to protect your electric bicycle or E-bike?
- 2 microfibre cloths, 1 to apply the coating and 1 to rub out
- The Cleanprotec Protec 'n Bike
Let's get started!
Make sure your bike is clean and dry, you can clean your bike with the Clean 'n Bike
Spray the Protec 'n Bike on the surface from about 15cm away and rub the surface with a microfibre cloth. Do this piece by piece until you have done the entire bike. You can apply the coating to all materials such as the frame, handlebars, saddle, battery, motor, rims and tires.
After you have treated the entire bike, it is time to rub the treatment. Do this with a clean microfibre cloth and rub until the surface has a nice shine. Matt remains matte and glossy becomes glossy again.
The Protec 'n Bike dries almost immediately and is very easy to process.
If you have any questions, ask them below and our product specialists will help you immediately.