Protect textile mouth caps
- 09 Feb, 2021
In the near future, everyone will be using mouth masks a lot. You want to protect yourself as much as possible while shopping, running errands or other activities. From 1 June it will be mandatory to wear mouth masks on public transport, because you cannot keep enough distance here. Protecting yourself against microorganisms, water and dirt is extremely important. Our nano coating Protec Textile 502 ensures that textile masks provide even better protection.
The nano coating Protec Textile 502 is an impregnating agent specially developed for textiles. The unique spray contributes to increasing your personal protection. Thus, the Protec Textile 502 for a transparent protective layer on the textile mouth cap. It makes the fabric water, oil and dirt resistant. The liquid makes a connection with the textile fibers and has a UV filter to preserve the color. After treatment and drying, the material acquires a pearling effect when it comes into contact with water. The Protec Textile 502 comes with the benefits below:
- Water, oil and dirt resistant
- Breathable, does not seal
- 100% hygienic
- Transparent protective layer
- Human and environmentally friendly
A non-medical mouth mask can provide very limited protection against contamination. The protection is highly dependent on the quality of the materials. For example, the filter effect may not be good enough. The Protec Textile 502 can make a positive contribution to this. The transparent protective layer by using the spray offers better protection against drops that occur when coughing or sneezing. At the same time, the fabric remains breathable because the protective layer does not seal. The product is made on a water basis and is human and environmentally friendly. The durable effect ensures that you can treat your mouth caps for a very long time with half a liter.
The spray is easy to use. Once our spray has been used, your textile mouth mask will be protected for up to 4-5 washes. This way you can protect and reuse your mouth mask for a long time. The instructions for use are as follows:
Step 1: Spray material on both sides
Step 2: Dry for 6-12 hours or iron dry for quick reaction
Step 3: Re-washable up to 4-5 times in the washing machine
Note: The mouth mask does not become a medical mouth mask
In case of stubborn dirt and stains, it is recommended to pre-clean with the PF Clean 501, then you can treat the surface with the Protec Textile 502. This ensures a better and long-lasting result. Using the Protec Textile 502 is approximately 100 ml per 5 mouth caps impregnated on both sides.
Furthermore, the spray can be applied to all textile surfaces, such as clothing, pillows or shoes. This way you can easily protect all your favorite items against water, dirt and dust.